SCKDEN=0, SPNDEN=0, SPB=0000, SLNDEN=0, SSLKP=0, SSLA=000, CPOL=0, CPHA=0, BRDV=00, LSBF=0
SPI Command Register 3
| CPHA | RSPCK Phase Setting 0 (0): Data sampling on odd edge, data variation on even edge 1 (1): Data variation on odd edge, data sampling on even edge |
| CPOL | RSPCK Polarity Setting 0 (0): RSPCK is low when idle 1 (1): RSPCK is high when idle |
| BRDV | Bit Rate Division Setting 0 (00): These bits select the base bit rate 1 (01): These bits select the base bit rate divided by 2 2 (10): These bits select the base bit rate divided by 4 3 (11): These bits select the base bit rate divided by 8 |
| SSLA | SSL Signal Assertion Setting 0 (others): Setting prohibited 0 (000): SSL0 1 (001): SSL1 2 (010): SSL2 3 (011): SSL3 |
| SSLKP | SSL Signal Level Keeping 0 (0): Negate all SSL signals on completion of transfer 1 (1): Keep SSL signal level from the end of transfer until the beginning of the next access. |
| SPB | RSPI Data Length Setting 0 (others): 8bits 0 (0000): 20 bits 1 (0001): 24 bits 2 (0010): 32 bits 3 (0011): 32 bits 8 (1000): 9 bits 9 (1001): 10 bits 10 (1010): 11 bits 11 (1011): 12 bits 12 (1100): 13 bits 13 (1101): 14 bits 14 (1110): 15 bits 15 (1111): 16 bits |
| LSBF | RSPI LSB First 0 (0): MSB first 1 (1): LSB first |
| SPNDEN | RSPI Next-Access Delay Enable 0 (0): A next-access delay of 1 RSPCK + 2 PCLK 1 (1): A next-access delay is equal to the setting of the RSPI next-access delay register (SPND) |
| SLNDEN | SSL Negation Delay Setting Enable 0 (0): An SSL negation delay of 1 RSPCK 1 (1): An SSL negation delay is equal to the setting of the RSPI slave select negation delay register (SSLND) |
| SCKDEN | RSPCK Delay Setting Enable 0 (0): An RSPCK delay of 1 RSPCK 1 (1): An RSPCK delay is equal to the setting of the RSPI clock delay register (SPCKD) |